FREE RETURNS. STANDARD SHIPPING ORDERS $99+
Showing 65–80 of 157 results
CLM100 Current Loop Monitor Maretron s CLM100 converts commercially available 4-20mA current loop transducers into digital data so a wide variety of information can be displayed on Maretron displays. Numerous 4-20mA current loop transducers are supported by the CLM100 including transducers for monitoring DC voltage and current, flow rate, distance, linear velocity and acceleration, angle,…
Maretron s DCR100 contains 6 Direct Current (DC) relays, each capable of switching up to 10amps. The DCR100 connects directly to an NMEA 2000 network, so you can turn on and off the relays from any device onboard or remotely running Maretron s N2KViewr software. The DCR100 easily handles resistive DC loads like lights, or…
Fuel Flow MonitorPart #: FFM100-01 Maretron s FFM100 provides precision fuel flow information to help optimize fuel consumption, which can save thousands of dollars in fuel operating cost. The FFM100 uses state-of-the-art, positive displacement metering technology for unprecedented accuracy. In fact, the accuracy of the FFM100 is nearly that of commercial vessel systems costing tens…
Fluid Pressure Monitor Maretron s Fluid Pressure Monitor is used to adapt up to six pressure transducers to the NMEA 2000® network (pressure transducers sold separately). This allows you to observe fluid pressures and tank levels anywhere on the vessel where there are NMEA 2000® compatible displays. With the appropriate transducer, the FPM100 reports either…
Fuel Flow Sensor – 2-100 LPH Features: Flow Range: 2 LPH to 100 LPH (0.53 GPH to 26.4 GPH) All M1AR fuel flow sensor accessories for the FFM100 are fitted with 1 4 NPT female threads Nominal K Factor: 1000 pulses L (3785.4 pulses Gal) Cable Length: 1m (3.28 ) Strainer Size: 200 Mesh (If…
Fuel Flow Sensor – 25-500 LPH 6.6-132 GPH Features: Operating Temperature: -40°C to 80°C (-40°F to 176°F) Storage Temperature: -65°C to 170°C (-85°F to 338°F) Port Size: 1 4 NPT Female Cable Length: 1M (3.28 ft) Maximum Viscosity: 1000 cPs Pressure: 68.95 Bar (1000 PSI) Strainer Size: 200 Mesh (If not already installed after fuel…
GPS200 – NMEA 2000 GPS Antenna ReceiverMaretron s GPS200 provides reliable position fixes 10 times per second, accurate boat speed four times per second, and precision time once per second. The GPS200 antenna receiver is a plug-and-play device that is fully compliant and certified to the NMEA 2000 Standard. It will directly connect to any…
IPG100 (Internet Protocol Gateway) lets you connect Maretron black boxes (MBB100 s), Maretron touch screens (DSM800 s), PC s, Mac s, tablets, or smartphones to an NMEA 2000 network so you can monitor and control your vessel using Maretron s N2KViewr software. The conventional way of viewing NMEA 2000 information is with a display on…
J2K100 Adapter Micro Female – Deutsche 12 Pin 2 Meter Use a Maretron J2K100 Adapter Micro Female Deutsche Cordset to attach the J2k100 directly into J1939 networks of compatible engines, transmissions, and gensets. Specifications: Connection Gender: Female Cable Length (Feet): 6 Box Dimensions: 1 H x 6 W x 6 L WT: 0.4 lbs UPC:…
J2K100 Adapter Micro Female – Deutsche 12 Pin 2T Use a Maretron J2K100 Adapter Micro Female Deutsche Cordset to attach the J2k100 directly into J1939 networks of compatible engines, transmissions, and gensets. Specifications: Connection Gender: Female Box Dimensions: 1 H x 7 W x 9 L WT: 0.55 lbs UPC: 873804001463
J2K100 Adapter Micro Female – Deutsche 4 Pin 2 Meter Use a Maretron J2K100 Adapter Micro Female Deutsche Cordset to attach the J2k100 directly into J1939 networks of compatible engines, transmissions, and gensets. Specifications: Connection Gender: Female Cable Length (Feet): 6 Box Dimensions: 1 H x 6 W x 7 L WT: 0.35 lbs UPC:…
J2K100 NMEA 2000® J1939 Bridge (Engine Transmission Genset Gateway) Maretron s J2K100 attaches directly into J1939 networks of compatible engines, transmissions, and gensets and converts the J1939 engine data to the NMEA 2000® marine digital interface. Critical engine, transmission, and genset data is then distributed throughout the vessel over a single cable where it can…
Micro Bulkhead Feed-Thru The Bulkhead Feed-Thru allows ease of installation through panels or bulkheads and establishes future connection points in a network installation. The bulkhead feed-thru also maintains the integrity of watertight bulkheads by providing a waterproof seal and connection Features rugged keyways for positive alignment of connections Waterproof rated to IP67
Micro Cap – Used to Cover Female Connector Micro cap used to cover female connectors. Specifications: Connection Gender: Female Box Dimensions: 1 H x 1 W x 1 L WT: 0.1 lbs UPC: 873804001388
Micro Cap – Used to Cover Male Connector Micro cap used to cover male connectors. Specifications: Connection Gender: Male Box Dimensions: 1 H x 1 W x 1 L WT: 0.1 lbs UPC: 873804001395
Micro Double-Ended Cordset – 0.5M Mechanical Contact Carrier Mat Color: Thermoplastic PUR Blue-Gray Molded Body Mat Color: Thermoplastic PUR Blue-Gray Contact Mat Plating: Brass Gold Coupling Nut Mat Plating: Brass Nickel Connector Outside Diameter: 0.59 Electrical Current Rating: 4.0 Amps Voltage Rating: 250 V Cable Outer Jacket Mat Color: PVC Gray Conductor Insulation Material: HDPE…
End of content
End of content
No products in the cart.
